Home / Shop / BAS Remote Remap Tools / Defender Remap Tool

BAS2 RRC Tool Hardware Only Add-On

£300.00 Excluding VAT
£300.00 Including VAT
BAS2 RRC Tool Hardware Only Add-On
BAS2 RRC Tool Hardware Only Add-On
BAS2 RRC Tool Hardware Only Add-On
BAS2 RRC Tool Hardware Only Add-On
BAS2 RRC Tool Hardware Only Add-On
BAS2 RRC Tool Hardware Only Add-On
BAS2 RRC Tool Hardware Only Add-On
BAS2 RRC Tool Hardware Only Add-On
BAS2 RRC Tool Hardware Only Add-On
BAS2 RRC Tool Hardware Only Add-On
BAS2 RRC Tool Hardware Only Add-On
BAS2 RRC Tool Hardware Only Add-On

Home / Shop / BAS Remote Remap Tools / Defender Remap Tool

BAS2 RRC Tool Hardware Only Add-On

£300.00 Excluding VAT
£300.00 Including VAT
Part Number: BAS2HWOnly
Hardware only
Please select shipping option to continue
I understand and take full responsibility when using BAS tuning and BAS will not be held responsibile for car mechanical failure and understand refunds are not given for bespoke tuning. I also agree to this web site online shop terms and conditions and policies. Warning – The fitting of any performance part or electronic upgrade may affect the vehicle warranty and/or alter the vehicle emissions or original type approval.Warning – The fitting of any performance part or electronic upgrade may affect the vehicle warranty and/or alter the vehicle emissions or original type approval.
I agree and understand the tuning terms and online shop T&C's
Please enter where and how your previous BAS remap was applied.
Enter How Your Previous BAS Tuning Was Applied
Please enter your cars Registration number
Enter your cars Registration Number
Please enter your car full vin number it is required for tool registration.
Enter your cars chassis number
To best make tuning for your car please advise upon any modifications you have previousley done tor plan for your car.
Tell us about ANY MODIFICATIONS done to your car
Please select any seperate add-ons needed at the time of purchase.
Please enter order reference, if you do not need to use one please enter N/A in the text box below.
Enter Order Reference
Please enter your cars mileage and also state Miles or Kms
Enter Car Mileage
Please agree that any old existing remap that may be present on the engine ecu will be lost and NOT recoverable or reusable.
I understand that NON BAS ecu content may be wiped off and not recoverable or reusable.
Please select if you would like shipping to your normal delivery invoice address or the nearest UPS collection point where applicable.
Please agree explicitly and understand that some produts that are shipped to your country may have import tax charged on import to your country.
I agree that vat and or duty may be charged by customs on products I import to my country from this UK online shop, and that I will be responsible any payments due.
Maximum quantity exceeded
Minimum purchase amount of 0 is Required
Maximum purchase amount of 10 is Allowed
Your Price: £300.00
300.000
A one-time price of £300.00 will be added to your order.
Maximum purchase amount of 10 is Allowed
  • Description
  • Specifications
This is a Hardware ONLY add-on aimed mainly for existing BAS remap owners allowing them to upgrade to the very latest in Engine Diagnostic Remote Remap Technology.

NEW… We have now added the facility for this very same Hardware Addon to be use on the Discovery 3 2.7L TDV6, RangeRover Sport 2.7L & 3.6L, RangeRover 3.6L and Defender Puma 2.4TDCi or 2.2TDCi that already have tuning from a non BAS provider assuming they are using the latest version engine calibration. More models getting added soon.

The tool can overwrite your engine control unit calibration, update your engine calibration software to the latest level and re apply the BAS Remap to your ECU.

This little tool boasts a wider range of diagnostic functionality and engine related features their is in ANY other remote device like it on the market! You simply can not get another tool like it anywhere with this level of capability and ease of use….

Apple iDevice & Android applications available for its control via the BAS2’s Bluetooth Smart enabled hardware.
PC & MAC application software for updating the BAS2 RRC tool and its firmware.
Diagnostic fault code reading and clear with worded text and snap shot data shown where present.
Live engine data logging with numerical and graphical views.
Save and export logs as PDF or CSV files.
Engine related service functions and resets.
Injector programming.
Puma Defender VCV programming.
Puma Defender Pilot correction learning.
Fuel pump resets.
Flash programming of the engine ecus latest calibration files.
Switch between Remap calibrations at your leisure.
Fitting of new and used engine control modules on some models.
As with anything BAS we have more to come and BAS are always…….. (Paving The Way!)

Currently BAS2 supported models are:

Defender Puma 2.4TDCi 2007-2011
Defender Puma 2.2TDCi 2012-2015
Discovery 3 L319 2.7L TDV6 pre 2009
Discovery 4 L319 2.7L TDV6 2010-2012
Discovery Sport L550 2.2L Diesel 2015-2016
RRS L320 2.7L TDV6 pre 2009
RRS L320 3.6L TDV8 pre 2009
RRS L494 5.0L SC 2014-2015
FFRR L322 3.6L TDV8 pre 2009
Freelander II L359 2.2L Diesel 2012> 150bhp & 190bhp
Evoque L538 2.2L Diesel 2012> 150bhp & 190bhp
New models worked on daily

You will be asked when ordering to provide us with information on where and when your BAS remap was originally installed, please provide us with as much information including the cars VIN/Chassis and registration numbers as you can to aid in a smooth remap transfer. (Tool Is Ordered To Vin)

NOTE. If any previous BAS remote tuning hardware was used on your car you should ALWAYS first return your car to original tuning level prior to using the BAS2 RRC.

As with all cars, BAS advise you follow a strict maintenance regime as advised by your car manufacturer, a correctly applied maintenance regime can make a difference to performance, reliability and in some cases economy.
We advise you use genuine brand Landrover parts for all your maintenance, changing the oil and filters on a more regular basis than scheduled can also help towards a longer lasting healthier running engine!
We insist on a up-rated performance intercooler for the Defender models to help maintain a cooler charge and air intake temperatures when cars are worked hard or for long periods. This is especially important when working at high engine rpm or road speeds and especially when used in hot country’s and climates. High exhaust gas temperatures and air intake temperatures can reduce the life of the engine and related components if low temperatures are not maintained.

Look after your car and it will look after you!

Warning – The fitting of any performance part or electronic upgrade may affect the vehicle warranty and/or alter the vehicle emissions or original type approval, we also advise you to inform your insurance company if fitting any none standard parts or power upgrades.

On checkout VAT will be added at the current UK rate of %20 where applicable. 
VAT will be removed for UK export sales, this will be shown in the checkout when you enter your NON UK address.

The tool BAS2 RRC will pair via bluetooth and be controlled by an Apple application available from the iTunes store, your Apple device must be seen as supported from the list below and be running firmware IOS 7.0 or above -iPad 3rd gen and up, -iPad Mini, -iPhone 4S and up, -iPod touch 5 and up. It also works with a medium to good quality Android device that has Bluetooth V4 or newer hardware built in. The BAS2 RRC will take its operational firmware, tuning files and any software updates via a Windows PC/MAC application provided.. The tool is an Engine ONLY tool, and only supports engine related functions like Fault codes read and clear, Live Data, ECU needed service resets, ECU Programming are just some of whats in its arsenal.